INAP564TAQ / INAP594TAQ

Twin APIX3 Transmitter with 12 Gbps for Video, Audio, Data and Ethernet with MIPI DSI video inputs

The INAP564T/INAP594TAQ together with an APIX3 receiver offers the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode its scalable physical layer provides bandwidth of up to 12 Gbps over distances of up to 10m at lowest EMI. The devices offer a dual MIPI DSI 1.2 video interface to handle 1 or 2 independent video streams of different resolution. The INAP592TAQ additionally includes HDCP 1.4 encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and retransmission mechanisms.

Features

• Flexible physical layer supporting
   – 1.5 Gbps, 3 Gbps or 6 Gbps downstream
   – 62.5/ 187.5 Mbps per lane upstream
   – Dual lane support for 3, 6 and 12 Gbps
        downstream
• Support for 2 independent receiver devices
• HDCP 1.4 support (INAP594T only)
• 2 DSI 1.2 video interfaces
   – DPHY 1.2 with up to 1.5 Gbps per lane
   – Support for combined 2x4 operation
     (odd/even) to support large videos
• Supported video resolution examples
   – 1920x720x24bit, 60Hz (uncompressed)
   – 2880x1080x24bit, 60Hz (uncompressed)
   – 3840x2160x30bit, 60Hz (VESA DSC)

• Configurable full-duplex communication
channel for Data, Ethernet or GPIO
   – 2x RGMII, RMII or MII interfaces for
     10/100Mbps Ethernet
   – SPI data interfaces
   – 4x GPIO per receiver for direct signaling
over the AShell (APFLAG)
• Embedded AShell protocol
• Audio interface I2S
   – supports 16/24/32 Bit word length
   – supports 44.1 kHz / 48 / 96 kHz sampling
   – Time Division Multiplexing (TDM) for up
to 8 channels
• Diagnostic Features:
   – Cable open / short detection
   – Continuous link monitoring
• APIX2 backward compatible
• Pin-to-pin compatible to INAP56xT and
INAP59xT devices

INAP564T / 594T APPLICATION