INAP562TAQ / INAP592TAQ

Twin APIX3 Transmitter with 12 Gbps for Video, Audio, Data & Ethernet

With HDMI & DSI Video Inputs

The INAP562T/INAP592TAQ together with an APIX3 receiver offers the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode its scalable physical layer provides bandwidth of up to 12 Gbps over distances of up to 10m at lowest EMI. The devices offer both, a HDMI 1.4a (3D) and a dual MIPI DSI 1.2 video interface to handle 1 or 2 independent video streams of different resolution.

The INAP592TAQ additionally includes HDCP 1.4 encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and re-transmission mechanisms.

INAP562TAQ / 592TAQ Datasheet

The INAP562TAQ / 592TAQ Datasheet
is only available with a Login and signed NDA.

Contact Inova
for more NDA information.

INAP562TAQ User Manual

The INAP562TAQ User Manual
is only available with a Login and signed NDA.

Contact Inova
for more NDA information.

Features

• Flexible physical layer supporting
– 1.5 Gbps, 3 Gbps or 6 Gbps downstream
– 62.5 Mbps/ 187.5 Mbps per lane upstream
– Dual lane support for 3, 6 and 12 Gbps
downstream
• Support for 2 independent receiver devices
• HDMI 1.4a interface incl. 3D support
– Direct DP++ connectivity supported
• HDCP 1.4 support (INAP592T only)
• 2 DSI 1.2 video interfaces
– DPHY 1.2 with up to 1.5 Gbps per lane
– Support for combined 2x4 operation
(odd/even) to support large videos
• Uncompressed video resolution examples
– 2880x1080x24bit, 60Hz
– 2x 1920x1080x24bit, 60Hz

• Configurable full-duplex communication
channel for Data, Ethernet or GPIO
– 2x RGMII, RMII or MII interfaces for
10/100Mbps Ethernet
– SPI data interfaces
– 4x GPIO per receiver for direct signaling
over the AShell (APFLAG)
• Embedded AShell protocol
• Audio interface over HDMI or I2S
– supports 16/24/32 Bit word length
– supports 44.1 kHz / 48 / 96 kHz sampling
– Time Division Multiplexing (TDM) for up
to 8 channels
• Diagnostic Features:
– Cable open / short detection
– Continuous link monitoring
• APIX2 backward compatible
• Pin-to-pin compatible to INAP56xT/
INAP59xT

INAP562TAQ / 592TAQ Typical Application
Application Notes

APPLICATION NOTES

DESCRIPTION

DOWNLOAD

AN301

APIX3 Transfer Channel Requirements

Login or Register

AN302

Measurement setup and procedure with the HSD connect

Login or Register

AN303

Design and Layout Guidelines for APIX3

Login or Register

AN305

Schematics Guideline INAP56x/59xTAQ

Login or Register

AN307

Line Driver Setup for INAP5xxTAQ in APIX2 mode

Login or Register

AN309

APIX3 Compliance

Login or Register

AN310

APIX3 Start-up and Diagnostic

Login or Register

AN311

INAP5xxTAQ/RAQ Quickstart Guide

Login or Register

AN312

APIX3 out of band signaling (OOB) over STP

Login or Register

AN316

Analyzing DisplayPort™ AUX Traffic

Login or Register

AN317

INAPxxT/R Register Dump

Login or Register

AN318

INAP567TAQ/597TAQ Information for functional safety relevant applications

Login or Register

AN319

INAP565TAQ Information for functional safety relevant applications

Login or Register

AN320

APIX3 – System ESD considerations

Login or Register

Symbol, Footprint & 3D Model

FORMAT

ZIP

CONTACT

BXL

Log in or register

Contact Inova

IBIS Model

register new account
password lost