INAP566TAQ / INAP596TAQ

APIX3 Transmitter with 12 Gbps for Video, Audio, Data & Ethernet

with DisplayPort™ Input

The INAP566TAQ / INAP596TAQ is a high-speed digital multi-channel transmitter for infotainment applications. Its scalable physical layer is based on the APIX3 technology, providing backward compatibility to APIX2. It establishes DC-balanced, AC coupled, low latency, point-to-point links over Coax, Shielded Twisted Pair (STP) or Shielded Quad cables (QSTP).

The INAP566TAQ / INAP596TAQ supports to combine both PHYs to one receiver in dual lane mode, resulting in up to 12Gbps bandwidth for one video stream.

The device supports popular automotive displays up to UHD video resolutions with up to 30bit color depth. The VESA DisplayPortTM (DP 1.4) ensures seamless interconnect to state-of-the-art SoCs. Using the dual lane mode with 12Gbps, the device supports uncompressed resolutions of up to 4k at 30Hz or formats of up to 8k pixel width.

The product version INAP596TAQ supports, in addition to all features of INAP566TAQ, High-bandwidth Digital Content Protection according to HDCP 2.3. It incorporates the encryption mechanisms, as well as the required keys, to transmit HDCP 2.3 encoded video content over the APIX3 link. In APIX2 mode HDCP 1.4 encryption is supported.

INAP566TAQ / 596TAQ Datasheet

A Login & signed NDA are needed to download the INAP566TAQ / 596TAQ Datasheet.

Contact Inova
for NDA information.

INAP566TAQ / 596TAQ Errata Sheet

A Login & signed NDA are needed to download the INAP566TAQ / 596TAQ Errata Sheet.

Contact Inova
for NDA information.

INAP566TAQ User Manual

A Login & signed NDA are needed to download the INAP566TAQ User Manual.

Contact Inova
for NDA information.

Features
  • Physical Layer
    • 1.5, 3 or 6 Gbps downstream
    • Support for dual lane configuration for single link up to 12 Gbps
      -- 6+6 Gbps, 3+3 Gbps, 1.5+1.5 Gbps
    • 187.5 Mbps upstream
    • 8 bit or 10 bit color depth
  • APIX 2 backward compatible (3 Gbps)

  • VESA DPTM 1.4a interface
    • 4 lanes HBR2 (2.7/5.4 Gbps/lane)
    • SST (1 video channel)
    • Aux Channel (1 Mbps)
    • HDCP 2.3. over DP
    • Audio over DP
  • DSC tunneling
    • for ~28 Gbps total video bandwidth
    • 8k@60Hz
  • HDCP 1.4 / 2.3 content protection over APIX
  • 2 MII/RMII interfaces for 2 receivers
    • - 10/100 Mbps support
  • Up to 8 GPIO Flags
    • protected signaling over AShell (APFLAG)
  • Configuration interface
    • Remote through AShell
    • SPI
  • Data communication via AShell
    • AUX Channel (Touch)
    • SPI Master/slave (30 Mbit/s)
  • I²S Audio interface
    • supports 16/24/32 Bit word length
    • supports up to 192kHz sampling
    • TDM support for up to 8 channels
  • Diagnostic Features:
    • Built-In PRBS Generator and checker
    • Continous link monitoring
INAP566TAQ / 596TAQ Typical Application
Application Notes

APPLICATION NOTES

DESCRIPTION

DOWNLOAD

AN301

APIX3 Transfer Channel Requirements

Login or Register

AN302

Measurement setup and procedure with the HSD connect

Login or Register

AN303

Design and Layout Guidelines for APIX3  

Login or Register

AN306

INAP566TAQ/596TAQ Schematics Guideline  

Login or Register

AN307

Line Driver Setup for INAP5xxTAQ in APIX2 mode

Login or Register

AN309

APIX3 Compliance

Login or Register

AN310

APIX3 Start-up and Diagnostic

Login or Register

AN311

INAP5xxTAQ/RAQ Quickstart Guide

Login or Register

AN312

APIX3 out of band signaling (OOB) over STP

Login or Register

Symbol, Footprint & 3D Model

FORMAT

ZIP

CONTACT

BXL

Log in or register

Contact Inova