APIX3 or APIX2 Transmitter with 12 Gbps for Video, Audio, Data & Ethernet

With MIPI DSI Video Input

The INAP565TAQ/INAP595TAQ together with an APIX3 receiver offer the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode it’s scalable physical layer provides bandwidth of up to 12 Gbps over distances of up to 10m at lowest EMI. Both devices offer a single MIPI DSI 1.2 video interface to handle one native or VESA DSC compressed video stream with 24 or 30-bit.

The INAP595TAQ additionally includes HDCP 1.4 source encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and re-transmission mechanisms.

INAP565TAQ / 595TAQ Datasheet

The INAP565TAQ / 595TAQ Datasheet
is only available with a Login and signed NDA.

Contact Inova
for more NDA information.

INAP565TAQ User Manual

The INAP565TAQ User Manual
is only available with a Login and signed NDA.

Contact Inova
for more NDA information.

  • Physical Layer
  • 6, 3 or 1.5 Gbps downstream
    -Support of 12 Gbps dual lane link
    -6+6 Gbps, 3+3 Gbps, 1.5 + 1.5 Gbps
  • 187.5Mbps upstream
  • Automatic link training
  • Supports STP (Shielded Twisted Pair), QSTP or Coax cables
  • Support to drive 2 receivers simultaneously
  • APIX2 compatible
  • Single Video Channel supports
  • Uncompressed video transmission up to 3840x1080 30bit @60Hz
  • VESA DSC compressed video up to 3840x2160 24bit @60Hz (4K2K) over single lane
  • Supports 18/24 or 30-bit color depth
  • Video integrity support
  • MIPI DSI 1.2 video interface (1x4)
  • DPHY 1.2 up to 1.5 Gbps/lane
  • Support for VESA DSC tunneling
  • HDCP 1.4 encryption engine (INAP595T)
  • Full-duplex communication channels for Data, Ethernet or GPIO
  • 2 MII/RMII/RGMII interfaces
    -10/100 Mbps support
  • SPI data interfaces
  • Up to 4 GPIO Flags per receiver for protected signaling over AShell (APFLAG)
  • Embedded AShell protocol data protection layer
  • I²S Audio interface
  • Supports 16/24/32 Bit word length
  • Supports up to 192kHz sampling
  • TDM support for up to 8 channels
  • Diagnostic Features:
  • Built-in PRBS generator and checker
  • Continuous link monitoring
INAP565TAQ / 595TAQ Typical Application
Application Notes





APIX3 Transfer Channel Requirements

Login or Register


Measurement setup and procedure with the HSD connect

Login or Register


Design and Layout Guidelines for APIX3

Login or Register


Schematics Guideline INAP56x/59xTAQ

Login or Register


Line Driver Setup for INAP5xxTAQ in APIX2 mode

Login or Register


APIX3 Compliance

Login or Register


APIX3 Start-up and Diagnostic

Login or Register


INAP5xxTAQ/RAQ Quickstart Guide

Login or Register


APIX3 out of band signaling (OOB) over STP

Login or Register


Analyzing DisplayPort™ AUX Traffic

Login or Register


INAPxxT/R Register Dump

Login or Register


INAP567TAQ/597TAQ Information for functional safety relevant applications

Login or Register

Symbol, Footprint & 3D Model





Log in or register

Contact Inova

IBIS Model

register new account
password lost