INAP563TAQ / INAP593TAQ
APIX3 Transmitter with 12 Gbps for Video, Audio, Data & Ethernet
With HDMI Video Input
The INAP563T/INAP593TAQ together with an APIX3 receiver offers the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode its scalable physical layer provides bandwidth of up to 12 Gbps over distances of up to 10m at lowest EMI. Both devices offer a HDMI 1.4a (3D) capable video interface to handle 1 or 2 independent video streams.
The INAP593TAQ additionally includes HDCP 1.4 encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and re-transmission mechanisms.
Subscribe to product update notifications: Login or register.
INAP563TAQ / 593TAQ Datasheet
The INAP563TAQ / 593TAQ Datasheet
is only available with a Login and signed NDA.
Contact Inova for more NDA information.
INAP563TAQ User Manual
The INAP563TAQ User Manual
is only available with a Login and signed NDA.
Contact Inova for NDA information.
- Physical Layer
- 6, 3 or 1.5 Gbps downstream
-Support of 12 Gbps dual lane link
-6+6 Gbps, 3+3 Gbps, 1.5 + 1.5 Gbps - 187.5Mbps upstream
- Automatic link training
- Supports STP (Shielded Twisted Pair), QSTP or Coax cables
- Support to drive 2 receivers simultaneously
- APIX2 compatible
- Two Video Channels
- Uncompressed video transmission up to 3840x1080 30bit @60Hz or 2x 2880x1080 24bit @60Hz
- Supports 18/24 or 30-bit color depth
- Video integrity support
- HDMI 1.4a video interface with 3D support
- Support for DP++ connectivity
- 2 HDCP 1.4 encryption engines (INAP593T)
- Source encryption, repeater functionality
- Full-duplex communication channels for Data, Ethernet or GPIO
- 2 MII/RMII/RGMII Ethernet interfaces
-10/100 Mbps support
- SPI data interfaces
- Up to 4 GPIO Flags per receiver for protected signaling over AShell (APFLAG)
- Embedded AShell protocol data protection layer
- Support for Audio over HDMI
- I²S Audio interface
- Supports 16/24/32 Bit word length
- Supports up to 192kHz sampling
- TDM support for up to 8 channels
- Diagnostic Features:
- Built-in PRBS generator and checker
- Continuous link monitoring
APPLICATION NOTES |
DESCRIPTION |
DOWNLOAD |
|---|---|---|
AN301 |
APIX3 Transfer Channel Requirements |
|
AN302 |
Measurement setup and procedure with the HSD connect |
|
AN303 |
Design and Layout Guidelines for APIX3 |
|
AN305 |
Schematics Guideline INAP56x/59xTAQ |
|
AN307 |
Line Driver Setup for INAP5xxTAQ in APIX2 mode |
|
AN309 |
APIX3 Compliance |
|
AN310 |
APIX3 Start-up and Diagnostic |
|
AN311 |
INAP5xxTAQ/RAQ Quickstart Guide |
|
AN312 |
APIX3 out of band signaling (OOB) over STP |
|
AN316 |
Analyzing DisplayPort™ AUX Traffic |
|
AN317 |
INAPxxT/R Register Dump |
|
AN318 |
INAP567TAQ/597TAQ Information for functional safety relevant applications |
FORMAT |
ZIP |
CONTACT |
BXL |